0MD1
Airport
Taylor Field
Sudlersville, Maryland

FAA NFDC Information 28-day cycle

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:0MD1 (Zero-Mike-Delta-One)
Lat/Lng:39.18733333333333, -75.79271166666666
39-11-14.4000N, 075-47-33.7620W
Estimated
Elevation:75 feet Estimated
Magnetic Variation:11W,(1990), [-12W (2025)]
Sectional:WASHINGTON
From City:3nm E of Sudlersville

Operations

Use:Private
Airspace Analysis:CONDITIONAL
Provided Dalgt, VFR, Pvt Use; Displace Threshold on Runway 08 to Provide 20:1 or Bury Power Lines; Remove or Lower Trees or Displace Threshold on Runway 26 to Provide 20:1; Move Bldg out of Primary Surface; Move Bldg out of Transitional Surface; 3 Objects on East Side of Runway 26 End be Removed.
Ownership:Privately owned
Activation:10/1991
Control Tower:no
ARTCC:Washington(ZDC)Washington Center
FSS:Leesburg FSS(DCA)
Wind Indicator:Unlighted
Beacon:None
Landing Fee:no

Communications

Services

Ownership

Owner:John S. & Annabelle E. Taylor
1913 Peters Corner Road
Marydel, Md 21649-1224
410-438-3178
Manager:John S. Taylor
1913 Peters Corner Road
Marydel, Md 21649-1224
410-438-3178

Runways

Runways:08/26

Runway 08/26

Length:3000 feet
Width:50 feet
Surface:Grass / Sod
Surface Treatment:NONE
End 08 End 26
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach

Procedures

NOTAMs

Additional Remarks

for Cd Contact Washington ARTCC at 703-771-3587.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.

rgrep