|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
| Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
| FAA Identifier: | 17TX (One-Seven-Tango-Xray) |
|---|---|
| Lat/Lng: | 32.448744722222216, -98.25504444444445 32-26-55.4810N, 098-15-18.1600W Estimated |
| Elevation: | 1100 feet Estimated |
| Magnetic Variation: | 07E,(1985), [3E (2025)] |
| Sectional: | DALLAS-FT WORTH |
| From City: | 12nm N of Stephenville |
| Use: | Private |
|---|---|
| Ownership: | Privately owned |
| Activation: | 10/1976 |
| Attended: | Continuous |
| Control Tower: | no |
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
| FSS: | Fort Worth FSS(FTW) |
| Wind Indicator: | Unlighted |
| Beacon: | None |
| Landing Fee: | no |
| Owner: | Kimzey Ranch 2578 N County Rd 318 Stephenville, Tx 76401 254-968-4994 |
|---|---|
| Manager: | John P. Kimzey 2578 N County Rd 318 Stephenville, Tx 76401 254-968-4994 |
| Runways: | 17/35 |
|---|
| Length: | 3200 feet |
|---|---|
| Width: | 30 feet |
| Surface: | Asphalt / Bituminous Concrete |
| Surface Treatment: | NONE |
| End 17 | End 35 |
|---|
| • | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
|---|
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep