|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
| Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
| FAA Identifier: | 2ND2 |
|---|---|
| Lat/Lng: | 47.566943333333334, -100.72124777777778 47-34-00.9960N, 100-43-16.4920W Estimated |
| Elevation: | 1910 feet Estimated |
| Magnetic Variation: | 10E,(1985), [5E (2025)] |
| Sectional: | TWIN CITIES |
| From City: | 4nm N of Mercer |
| Use: | Private |
|---|---|
| Airspace Analysis: | CONDITIONAL Obstns in Runway Approach Slope Surface be Removed/Lowered or Runway Threshold Displaced and Marked to Provide Min 20:1 Approach Clearance and Area 125' Either Side Runway Centerline Clrd of Any Obstns. |
| Ownership: | Privately owned |
| Attended: | Owner Lives Beside Strip. |
| Control Tower: | no |
| ARTCC: | Minneapolis(ZMP)Minneapolis Center |
| FSS: | Grand Forks FSS(GFK) |
| Wind Indicator: | Unlighted |
| Beacon: | None |
| Landing Fee: | no |
| Owner: | Russell Makeeff Mercer, Nd 58559 701-447-2467 |
|---|
| Runways: | E/W |
|---|
| Length: | 2600 feet |
|---|---|
| Width: | 70 feet |
| Surface: | Grass / Sod |
| Surface Treatment: | NONE |
| End E | End W |
|---|
| • | for Cd Contact Minneapolis ARTCC at 651-463-5588. |
|---|
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep