|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
| Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
| FAA Identifier: | 75NC |
|---|---|
| Lat/Lng: | 36.221250000000005, -80.03333333333333 36-13-16.5000N, 080-02-00.0000W Estimated by Ado on 10/02/2024 |
| Elevation: | 880 feet Estimated by Ado on 10/02/2024 |
| Magnetic Variation: | [-9W (2025)] |
| Sectional: | CINCINNATI |
| From City: | 3nm SW of Stokesdale |
| Use: | Private |
|---|---|
| Airspace Analysis: | CONDITIONAL |
| Ownership: | Privately owned |
| Activation: | 10/2024 |
| Control Tower: | no |
| ARTCC: | Atlanta(ZTL)Atlanta Center |
| FSS: | Raleigh FSS(RDU) |
| Wind Indicator: | Lighted |
| Beacon: | None |
| Landing Fee: | no |
| CTAF: | 122.900 |
|---|
| Owner: | Adam Meylor 7587 Happy Hill Rd Kernersville, Nc 27284 336-520-0417 |
|---|---|
| Manager: | Adam Meylor 7587 Happy Hill Rd Kernersville, Nc 27284 336-520-0417 |
| Runways: | 13/31 |
|---|
| Length: | 1212 feet by Ado on 10/02/2024 |
|---|---|
| Width: | 150 feet |
| Surface: | Grass / Sod, Fair Condition |
| Surface Treatment: | NONE |
| End 13 | End 31 | |
|---|---|---|
| True Alignment: | 126,(117 Magnetic) | 306,(297 Magnetic) |
| Runway Markings: | None | None |
| Elevation at End: | 810.0' MSL | 880.0' MSL |
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep