|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
| Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
| FAA Identifier: | 7TA4 |
|---|---|
| Lat/Lng: | 31.759563611111112, -96.05449597222221 31-45-34.4290N, 096-03-16.1855W Estimated by Owner on 01/14/2025 |
| Elevation: | 438 feet Estimated by Owner on 01/14/2025 |
| Magnetic Variation: | [2E (2025)] |
| Sectional: | HOUSTON |
| From City: | 6nm NE of Fairfield |
| Use: | Private |
|---|---|
| Ownership: | Privately owned |
| Activation: | 01/2025 |
| Control Tower: | no |
| ARTCC: | Fort Worth(ZFW)Fort Worth Center |
| FSS: | Fort Worth FSS(FTW) |
| Wind Indicator: | Unlighted |
| Beacon: | None |
| Landing Fee: | no |
| Owner: | Burnett and Sons Inc Attn: Casey Coley 999 US Hwy 84 Fairfield, Tx 75840 903-388-7423 |
|---|---|
| Manager: | Michael Steward 999 US Hwy 84 Fairfield, Tx 75840 903-245-6427 STACYRDODD@GMAIL.COM |
| Runways: | 13/31 |
|---|
| Length: | 4000 feet by Owner on 01/14/2025 |
|---|---|
| Width: | 75 feet |
| Surface: | Asphalt / Bituminous Concrete, Good Condition |
| Surface Treatment: | NONE |
| Weight Capacity: | Single Wheel aircraft: 12,000 lbs |
| End 13 | End 31 | |
|---|---|---|
| Runway Markings: | Basic | Basic |
| Elevation at End: | 367.2' MSL | 438.3' MSL |
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep