|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
| Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
| FAA Identifier: | SD38 |
|---|---|
| Lat/Lng: | 44.100376000000004, -103.169201 44-06-01.3536N, 103-10-09.1236W Estimated by Owner on 08/06/2024 |
| Elevation: | 3150 feet Estimated by Owner on 08/06/2024 |
| Magnetic Variation: | [7E (2025)] |
| Sectional: | CHEYENNE |
| From City: | 3nm WSW of Rapid City |
| Use: | Private Medical Use. |
|---|---|
| Airspace Analysis: | CONDITIONAL |
| Ownership: | Privately owned |
| Activation: | 08/2024 |
| Control Tower: | no |
| ARTCC: | Denver(ZDV)Denver Center |
| FSS: | Huron FSS(HON) |
| Wind Indicator: | Lighted |
| Beacon: | None |
| Landing Fee: | no |
| CTAF: | 122.900 |
|---|
| Owner: | Exeptional Helathcare 3514 Cedar Springs Rd. Dallas, Tx 75219 469-341-7800 Attn: Don Nicolini. |
|---|---|
| Manager: | Robert Kunkel 3514 Cedar Springs Rd. Dallas, Tx 75219 469-807-1200 |
| Runways: | H1 |
|---|
| Length: | 40 feet by Owner on 08/06/2024 |
|---|---|
| Width: | 40 feet |
| Surface: | Porland Cement Concrete |
| Surface Treatment: | NONE |
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep