|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
| Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
| FAA Identifier: | TT87 |
|---|---|
| Lat/Lng: | 29.79865280555556, -100.28787241666666 29-47-55.1501N, 100-17-16.3407W Estimated by Owner on 11/06/2023 |
| Elevation: | 2053 feet Estimated by Owner on 11/06/2023 |
| Magnetic Variation: | [4E (2025)] |
| Sectional: | SAN ANTONIO |
| From City: | 14nm SW of Rocksprings |
| Use: | Private |
|---|---|
| Airspace Analysis: | CONDITIONAL |
| Ownership: | Privately owned |
| Activation: | 11/2023 |
| Control Tower: | no |
| ARTCC: | Houston(ZHU)Houston Center |
| FSS: | San Angelo FSS(SJT) |
| Wind Indicator: | Unlighted |
| Beacon: | None |
| Landing Fee: | no |
| Owner: | Agua Nada Ranch Llc 2901 Caballo Ranch Road #2C Cedar Park, Tx 78641 512-762-1711 |
|---|---|
| Manager: | Karl Schmidt 2901 Caballo Ranch Road #2C Airport Lcn: Rocksprings, Tx 78880 Cedar Park, Tx 78641 512-762-1711 KARLSS87@GMAIL.COM |
| Runways: | 04/22 |
|---|
| Length: | 2245 feet by Owner on 11/06/2023 |
|---|---|
| Width: | 50 feet |
| Surface: | Grass / Sod |
| Surface Treatment: | NONE |
| End 04 | End 22 | |
|---|---|---|
| Runway Markings: | None | None |
| Elevation at End: | 2017.0' MSL | 2053.0' MSL |
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep