IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
FAA Identifier: | TX51 (Tango-Xray-Five-One) |
---|---|
Lat/Lng: | 32.20014916666667, -96.32942361111111 32-12-00.5370N, 096-19-45.9250W Estimated |
Elevation: | 405 feet Estimated |
Magnetic Variation: | 06E,(1985), [2E (2025)] |
Sectional: | DALLAS-FT WORTH |
From City: | 10nm NE of Corsicana |
Use: | Private |
---|---|
Airspace Analysis: | NOT ANALYZED Pre Dates the Act |
Ownership: | Privately owned |
Activation: | 06/1958 |
Control Tower: | no |
ARTCC: | Fort Worth(ZFW)Fort Worth Center |
FSS: | Fort Worth FSS(FTW) |
Wind Indicator: | None |
Beacon: | None |
Landing Fee: | no |
Airframe Repair: | None |
---|---|
Powerplant Repair: | None |
Owner: | C. D. Smith Po Box 312020 New Braunfels, Tx 78131-2020 210-629-6762 |
---|---|
Manager: | Douglas E Smith Po Box 312020 New Braunfels, Tx 78131-2020 |
Runways: | E/W N/S NW/SE |
---|
Length: | 2075 feet |
---|---|
Width: | 50 feet |
Surface: | Grass / Sod |
Surface Treatment: | NONE |
End E | End W |
---|
Length: | 2200 feet |
---|---|
Width: | 50 feet |
Surface: | Grass / Sod |
Surface Treatment: | NONE |
End N | End S |
---|
Length: | 1620 feet |
---|---|
Width: | 50 feet |
Surface: | Grass / Sod |
Surface Treatment: | NONE |
End NW | End SE |
---|
• | for Cd Contact Fort Worth ARTCC at 817-858-7584. |
---|
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep