|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
IFR Enroute Charts
at skyvector.com Click on airport for details, drag to scroll around. Zoom using +/- keys. |
|
FAA NFDC Information 28-day cycle
| Ops | Comms | Services | Owner | Runways | IFR Procs | Current NOTAMs | Remarks |
| FAA Identifier: | UT52 |
|---|---|
| Lat/Lng: | 37.09890902777778, -113.552685 37-05-56.0725N, 113-33-09.6660W Estimated by Arpts Contractor on 06/16/2020 |
| Elevation: | 2655 feet Estimated by Arpts Contractor on 06/16/2020 |
| Magnetic Variation: | 11E,(2025), [11E (2025)] |
| Sectional: | LAS VEGAS |
| From City: | 1nm NW of St George |
| Use: | Private Medical Use. |
|---|---|
| Ownership: | Privately owned |
| Activation: | 03/1985 |
| Attended: | Continuous |
| Control Tower: | no |
| ARTCC: | Los Angeles(ZLA)Los Angeles Center |
| FSS: | Cedar City FSS(CDC) |
| Wind Indicator: | Lighted |
| Lights: | Sunset-Sunrise |
| Beacon: | None |
| Landing Fee: | no |
| Owner: | St. George Regional Medical 1380 E. Medical Center Dr St George, Ut 84790 435-251-1000 |
|---|---|
| Manager: | George Mcgee 1380 E. Medical Center Dr St George, Ut 84790 435-688-4003 |
| Runways: | H1 |
|---|
| Length: | 60 feet by Owner on 03/01/1985 |
|---|---|
| Width: | 50 feet |
| Surface: | Porland Cement Concrete, Good Condition |
| Surface Treatment: | NONE |
| Runway Lights Edge Intensity: | Perimeter |
| • | for Cd Contact Los Angeles ARTCC at 661-575-2079. |
|---|
This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the Chart Supplment (A/FD) via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.
rgrep